# Seattle Westin PoP ``` RGnet, LLC. c/o FiberCloud 2001 6th, Suite 1809 Seattle, WA 98121 FiberCloud Support 206 777 9988 24x7@ccom.net 206-854-3444 and 206-353-5558 RGnet rack Suite 1809 Cabinet C2 GreenHouse tie-down to Verio Backbone - Rack 204 Panel 9 Port A6 r03.sttlwa01.us.bb so-1/1/0 NTT USID 278679 r05.sttlwa01.us.bb Gi100/0/0/15 WAN IPs on your side: 165.254.106.18/30 2001:418:0:5000::12/126 SIX 1G to USC RGnet.SW3.SEA eth1/46 RGnet.1809.CAB.C02.P1.1/2 GHD.1809.CAB.D04.P1.M3 GHD.19FMMR.RR.405.3.M3 SIX.19FMMR.RR.506.7.D3 SIX 1G to r1 RGnet.Juniper.Ge-0/0/1 RGnet.1809.CAB.C02.P1.3/4 GHD.1809.CAB.D04.P1.M4 GHD.19FMMR.RR.405.3.M4 SIX.19FMMR.RR.506.7.E3 SIX 10G to Arrcus sixa.rg.net RGnet. sixa.rg.net.Ge-0/0/1 RGnet.1809.CAB.C02.P1.5/6 GHD.1809.CAB.D04.P2.F4 GHD.19FMMR.RR.1001.3.F4 SIX.19FMMR.RR.901.9.A4 SprintLink 1G to r1 RGnet.Juniper.Ge-0/0/2 RGnet.1809.CAB.C02.P1.7/8 GHD.1809.CAB.D04.P1.M5 GHD.19FMMR.RR.405.3.M5 Sprint.19FMMR.RR.604.5.A5 (9/10) ``` ## Rack Physical and Wiring | hostname | switch | ipmi | oob | oobname | pwr | rack | Model | | :---------------------------- | ----------- | ----- | ---- | ------- | --------- | ----- | ----------------------------------------------------- | | pwr1.sea.rg.net | s0.16 | | | | 2.x? | 43 | | | sw4.sea.rg.net | s3.47 | | 1.07 | sw4 | 1.1 | 41 | Cisco Nexus-3064 | | rcuss0.rg.net | s0.23 | N/A | 1.08 | rcuss0 | 1.2 | 40 | Redstone | | vm3.rg.net | s4.20/s4.22 | s4.18 | 1.01 | vm3 | 0.2 | 39 | SuperMicro SuperServer 6019U-TRT | | r2.sea.rg.net | ma1 sw4.36 | | 1.16 | sixa | 1.8 | 38 | Arrcus Delta 9020S DNX aka ma1.sixa.rg.net | | | s4.47 | | 1.16 | sixa | 2.2 | 38 | Arrcus Delta 9020S DNX aka sixa.rg.net | | rip.psg.com | s4.32 | s0.28 | 1.04 | rip | 0.3 | 36 | NOW VIRT ON VM4 Supermicro 5015M-NTRB w/ Super PDSMU | | vm2.sea.rg.net | s0.41/s0.31 | s0.6 | 1.14 | vm2 | 2.7 2.1 | 34-35 | SuperMicro AS-2022G-URF 2RU Chassis | | psg.com | s0.13 | s2.12 | 1.05 | psg | 1.5 | 33 | (see below) | | seattle01.mux.peering.usc.edu | s0.11 | 0.20 | | | | 31 | Supermicro Ethan Katz-Bassett | | sw3.sea.rg.net | s0.47 | | 1.01 | sw3 | 0.7 | 27 | Cisco Nexus-3064 | | sw0.sea.rg.net | s3.48 | | 1.06 | sw0 | 0.4 | 26 | Cisco WS-C3750G-POE-48 | | o1.sea.rg.net | s0.15 | | 0.04 | o1 | 2.4 | 24 | Cisco 2511 | | pwr2.sea.rg.net | s0.10 | | | | | 21 | | | atlas0.sea.rg.net | s0.19 | | | | | 20.5 | | | raid0.sea.rg.net | s0.27 | s0.03 | 0.15 | raid0 | 0.6 | 19 | SuperMicro 5018R-WR | | vm1.sea.rg.net | s0.34/s0.30 | s0.33 | | vm1 | 1.2 | 16-17 | (see below) | | vm0.sea.rg.net | s0.26/s0.29 | s0.39 | 1.09 | vm0 | 2.5 | 15 | Supermicro - w/ X7DWU | | pwr3.sea.rg.net | s0.18 | | | | x.3 | 13 | | | pwr0.sea.rg.net | s0.12 | | | | | 11 | | | o0.sea.rg.net | s0.05 | | 1.13 | o0 | 2.6 | 10 | Cisco 2511 | | r0.sea.rg.net | s0.35/46 | | 0.06 | r0 | 0.8 & 3.7 | 7 | Cisco ASR1001 commissioned 2018.02.02 | | r1.sea.rg.net | s0.17 | | 0.02 | r1 | 2.1 & 3.1 | 5-6 | Juniper M7i | ### Removed | hostname | switch | ipmi | oob | oobname | pwr | rack | Model | | :-------------- | ----------- | ---- | ----- | ------- | --------- | ----- | ------------------------------------- | | dum0.sea.rg.net | s2.23 s2.24 | | 1.10 | dum0 | 1.1/1.2 | 42 | Supermicro - w/ PDSMi/PDSMA | | work1.psg.com | s1.11 | | 1.11 | work0 | 3.7 | 39 | decommissioned 2015.07.20 | | bgp.nu | s0.07/17 | | | | | 37-38 | Paul Southworth | | sw2.sea.rg.net | s0.48 | | 1.02 | sw2 | 0.7 | 27 | Cisco WS-C3750G-POE | | sw1.sea.rg.net | s0.01 | | 1.07 | sw1 | ?? | 25 | SMC SMC8024L2 | | r2.sea.rg.net | s0.14 s2.14 | | 0.09? | r2 | 2.8 | 7 | Cisco 1001 | | r0.sea.rg.net | s0.03 | | 0.01 | r0 | 0.1 & 3.4 | 2-4 | Cisco 7206g2 decommisioned 2018.02.02 | ## vm[0-3].sea.rg.net Ganeti Cluster ### BackChannel (net 10) drdb Ports for vm0-3 | Switch | Port | Host | Ether | IP Address | | ------ | ---- | ------- | ----- | ---------- | | sw0 | 29 | vm0.sea | eth1 | 10.0.0.100 | | sw0 | 30 | vm1.sea | eth5 | 10.0.0.101 | | sw0 | 31 | vm2.sea | eth1 | 10.0.0.102 | | sw4 | 22 | vm3.sea | eth1 | 10.0.0.103 | ``` vm0.sea.rg.net:/root# ./do-stat Node DTotal DFree MTotal MNode MFree Pinst Sinst vm0.sea.rg.net 10.9T 7.4T 125.8G 18.4G 107.8G 10 6 vm1.sea.rg.net 5.9T 3.2T 70.9G 8.7G 62.6G 7 8 vm2.sea.rg.net 5.5T 3.4T 63.0G 7.0G 56.0G 6 6 vm3.sea.rg.net 16.4T 15.5T 126.1G 20.4G 107.3G 2 2 ``` ### Hosts on vm0/1/2/3.sea.rg.net / 147.28.0.14/15/16/29 | Instance | Primary_node | Secondary_Node | MaxMem | DiskUsage | IP_Address | SysAdmin | | --------------------- | -------------- | -------------- | ------ | --------- | ------------ | --------------------------------- | | adrilankha.hactrn.net | vm1.sea.rg.net | vm0.sea.rg.net | 4G | 260G | 147.28.0.19 | Rob Austein | | archive.psg.com | vm1.sea.rg.net | vm0.sea.rg.net | 1G | 100G | 147.28.0.8 | Randy Bush | | atlas9.sea.rg.net | vm1.sea.rg.net | | 2G | 16G | 147.28.0.36 | Randy Bush | | atlasvm.sea.rg.net | vm1.sea.rg.net | | 2G | 8G | 147.28.0.33 | Randy Bush | | build-u.rpki.net | vm1.sea.rg.net | vm2.sea.rg.net | 1G | 100G | 147.28.0.28 | Rob Austein | | cache0.sea.rpki.net | vm2.sea.rg.net | vm0.sea.rg.net | 1G | 100G | 147.28.0.84 | Randy Bush | | cb.rg.net | vm0.sea.rg.net | | 4G | 128G | 147.28.0.44 | Randy Bush | | cc.rg.net | vm0.sea.rg.net | | 4G | 128G | 147.28.0.45 | Randy Bush | | chezrandy.x0.dk | vm2.sea.rg.net | | 2G | 200G | 147.28.0.56 | Phil Regnauld | | dataviz.org | vm0.sea.rg.net | vm31sea.rg.net | 8G | 64G | 147.28.0.22 | John Ellson | | gogs.rg.net | vm3.sea.rg.net | vm0.sea.rg.net | 2G | 64G | 147.28.0.10 | Randy Bush | | hans.rg.net | vm0.sea.rg.net | vm2.sea.rg.net | 3G | 250G | 147.28.0.42 | Hans Kuhn | | hiroshima.bogus.com | vm1.sea.rg.net | vm0.sea.rg.net | 3G | 250G | 147.28.0.82 | Hans Kuhn | | julian.rg.net | vm2.sea.rg.net | | 2.0G | 16.0G | 147.28.0.57 | Cristel Pelsser | | nagasaki.bogus.com | vm0.sea.rg.net | vm1.sea.rg.net | 4G | 250G | 147.28.0.81 | Joel Jaeggli | | netsrv.sea.rg.net | vm1.sea.rg.net | vm2.sea.rg.net | 1G | 200G | 147.28.0.7 | Randy Bush | | nlring.sea.rg.net | vm2.sea.rg.net | vm1.sea.rg.net | 2G | 32G | 147.28.0.89 | Randy Bush | | okui.psg.com | vm0.sea.rg.net | vm1.sea.rg.net | 1G | 1001G | 147.28.0.25 | Patrick Okui | | pfs.sea.rg.net | vm3.sea.rg.net | | 1G | 8G | 147.28.0.32 | Randy Bush | | pws0 | vm2.sea.rg.net | vm1.sea.rg.net | 4G | 100G | 147.28.0.52 | Paul Southworth | | pws1 | vm1.sea.rg.net | vm0.sea.rg.net | 8G | 500G | 147.28.0.53 | Paul Southworth | | r1.securerouting.org | vm1.sea.rg.net | vm2.sea.rg.net | 2G | 100G | 147.28.0.131 | Sam Weiler | | rcuss-build.rg.net | vm3.sea.rg.net | vm2.sea.rg.net | 64G | 128G | 147.28.0.170 | Rob Austein | | rcuss-mgt.rg.net | vm3.sea.rg.net | vm2.sea.rg.net | 2G | 32G | 147.28.0.169 | Randy Bush | | rfd.sea.rg.net | vm0.sea.rg.net | | 3G | 32G | 147.28.0.10 | Clemens Mosig | | rip.psg.com | vm3.sea.rg.net | vm2.sea.rg.net | 4.0G | 32.1G | 147.28.0.39 | Randy Bush | | rip1.psg.com | vm2.sea.rg.net | vm1.sea.rg.net | 1G | 36G | 147.28.0.31 | Randy Bush | | tamias.rg.net | vm0.sea.rg.net | vm2.sea.rg.net | 2.0G | 17.0G | 147.28.0.80 | Randy Bush | | turing.sr-ix.com | vm2.sea.rg.net | vm3.sea.rg.net | 2G | 256G | 147.28.0.17 | Tom Jennings | | valid.rg.net | vm0.sea.rg.net | vm2.sea.rg.net | 8G | 200G | 147.28.0.30 | Matthias Wählisch | | vm2.iad.rg.net | vm0.sea.rg.net | | 1G | 32G | 147.28.0.9 | Randy Bush | | work0.psg.com | vm0.sea.rg.net | vm1.sea.rg.net | 4G | 100G | 147.28.0.37 | Randy Bush | | xmpp.rg.net | vm1.sea.rg.net | vm3.sea.rg.net | 1G | 36G | 147.28.0.6 | Randy Bush | | zoe.dns.gh | vm2.sea.rg.net | vm1.sea.rg.net | 1G | 200G | 147.28.0.23 | Joel Jaeggli | | zzyzx.sigpipe.org | vm0.sea.rg.net | vm1.sea.rg.net | 2G | 100G | 147.28.0.13 | Michael Elkins | ## vm0.sea.rg.net Hardware **[SuperMicro SuperServer 6018R-MT Chassis](https://www.supermicro.com/products/system/1u/6018/sys-6018r-mt.cfm) ** [​SuperMicro X10DRL-i MotherBoard](https://www.supermicro.com/products/motherboard/Xeon/C600/X10DRL-i.cfm) - 2 Intel Xeon E5-2630 V4 2.2 GHz LGA 2011 85W - 128G Kingston ValueRAM 64GB (4 x 16GB) 288-Pin DDR4 SDRAM ECC Registered DDR4 2133 (PC4 17000) Server Memory Model KVR21R15D4K4/64 ### vm0.sea drives, numbered left to right From `for i in a b c d; do smartctl -a /dev/sd$i | egrep 'Model|Serial|Capacity'; done` | Bay | Model | Serial | | | ---- | ------------------ | -------- | ---------- | | 0 | WD6002FFWX-68TZ4N0 | NCGW1TVV | 2016.09.24 | | 1 | WD6002FFWX-68TZ4N0 | NCGWP5SV | 2016.09.24 | | 2 | WD6002FFWX-68TZ4N0 | NCGWD6NV | 2016.09.24 | | 3 | WD6002FFWX-68TZ4N0 | NCGX7MTV | 2016.09.24 | ## vm1.sea.rg.net Hardware **[Cisco R210-2121605W - part 74-7341-02 - serial QCI1549A9AY](http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/data_sheet_c78-587522.html)** - Effectively: 72GB RAM, 4TB datastore1, 8 cores - UCS C210 M2 Svr, 2x E5640, 2x4GB, SAS Expand, 1PS - 2 x 2.66GHz Xeon E5640 80W CPU/12MB cache/DDR3 1066MHz - 4 x 16GB DDR3-1066MHz RDIMM/PC3-8500/quad rank/Low-Dual Volt - 2 x 4GB DDR3-1333MHz RDIMM/PC3-10600/dual rank 1Gb DRAMs - LSI 6G MegaRAID 9261-8i card (RAID 0,1,5,6,10,60) - 512WC - 8 x 500GB 6Gb SATA 7.2K RPM SFF hot plug/drive sled mounted - Intel Quad port GbE Controller (E1G44ETG1P20) ### vm1.sea.rg.net Disk Drives From `megacli -PDList -aALL | egrep 'Coerced|Inquiry'` also use `{sudo smartctl -a -d sat+megaraid,8 /dev/sda` `megacli -PDList -aall | egrep '^(Slot|Firmware)'` is also useful | LUN | Serial | Model | Size | | ---- | -------- | ----------- | -------- | | 01 | 9XF0VD4E | ST9500620NS | 464.7 Gb | | 02 | 9XF0TQ93 | ST9500620NS | 464.7 Gb | | 03 | 9XF0VCK3 | ST9500620NS | 464.7 Gb | | 04 | 9XF0WE31 | ST9500620NS | 464.7 Gb | | 05 | 9XF0WEYZ | ST9500620NS | 464.7 Gb | | 06 | 9XF0VDFF | ST9500620NS | 464.7 Gb | | 07 | 9XF0VBXF | ST9500620NS | 464.7 Gb | | 08 | 9XF1YZBY | ST9500620NS | 464.7 Gb | | 09 | 9XF0TL1A | ST9500620NS | 464.7 Gb | | 10 | 9XF0TKYH | ST9500620NS | 464.7 Gb | | 11 | 9XF0WDD2 | ST9500620NS | 464.7 Gb | | 12 | 9XF0VRFD | ST9500620NS | 464.7 Gb | | 13 | 9XF0WCVD | ST9500620NS | 464.7 Gb | | 14 | 9XF0TQ80 | ST9500620NS | 464.7 Gb | | 15 | 9XF0VR81 | ST9500620NS | 464.7 Gb | | 16 | WTF? | | | **[Drive Bays from Cisco Install Manual](https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C210M1/install/C210M1/replace.html)** | | | HDD_01 | HDD_02 | HDD_03 | | ------ | ------ | ------ | ------ | ------ | | | | HDD_04 | HDD_05 | HDD_06 | | HDD_07 | HDD_08 | HDD_09 | HDD_10 | HDD_11 | | HDD_12 | HDD_13 | HDD_14 | HDD_15 | HDD_16 | ## vm2.sea.rg.net Hardware **[SuperMicro AS-2022G-URF 2RU Chassis](http://www.supermicro.com/Aplus/system/2U/2022/AS-2022G-URF.cfm)** - [H8DGU-F Motherboard](http://www.supermicro.com/Aplus/motherboard/Opteron6000/SR56x0/H8DGU-F.cfm) - [Two AMD Opteron 6320 Abu Dhabi 2.8GHz](http://www.amd.com/en-us/products/server/opteron/6000/6300) - [64GB RAMM as two sets of Kingston 32GB (4 x 8GB) 240-Pin DDR3 SDRAM ECC Unbuffered](http://www.kingston.com/us/memory/search/?partid=KVR16E11K4/32) - [32G, two sets of two DIMMs of Crucial Crucial 16GB (2 x 8GB) 240-Pin DDR3 SDRAM ECC Unbuffered DDR3L 1600 (PC3L 12800) Server Memory Model CT2KIT102472BD160B](http://www.crucial.com/usa/en/ct2kit102472bd160b) - [LSI MegaRAID SATA/SAS 9260-8i](http://www.lsi.com/products/raid-controllers/pages/megaraid-sas-9260-8i.aspx) - [Five HGST Ultrastar 7K3000 HUA723020ALA640 (0F12455) 2TB 7200 RPM 64MB Cache SATA 6.0Gb/s](http://www.hgst.com/hard-drives/enterprise-hard-drives/enterprise-sas-drives/ultrastar-7k3000) ### vm2.sea.rg.net Disk Drives From `megacli -PDList -aALL | egrep 'Coerced|Inquiry'` also use `vm1.sea.rg.net:/home/randy# sudo smartctl -a -d sat+megaraid,8 /dev/sda smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-7-amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org ### START OF INFORMATION SECTION Model Family: Seagate Constellation.2 (SATA) Device Model: ST9500620NS Serial Number: 9XF0VD4E LU WWN Device Id: 5 000c50 03fb7cdd0 Firmware Version: CC02 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Mar 3 20:41:38 2019 UCT SMART support is: Available - device has SMART capability. SMART support is: Enabled | LUN | Serial | Model | Size | | ---- | -------------- | -------- | -------- | | 0 | MK0171YFK3TVGA | MK7OAA10 | 1.818 TB | | 1 | MK0251YGKB56HA | MK7OAA10 | 1.818 TB | | 2 | MK0251YGKB4N2A | MK7OAA10 | 1.818 TB | | 3 | MK0251YGKB58LA | MK7OAA10 | 1.818 TB | | 4 | MJ1311YNG6XEVA | MEAOA5C0 | 2.728 TB | ## vm3.sea.rg.net Hardware **[SuperMicro SuperServer 6019U-TRT](https://www.supermicro.com/products/system/1U/6019/SYS-6019U-TRT.cfm)** - [X10DRW-iT Motherboard](https://www.supermicro.com/products/motherboard/Xeon/C600/X10DRW-IT.cfm) - [Two Intel Ten Core 2.4Ghz Xeon 25MB cache 8.0GT/s QPI (90W) (E5-2640v4)](http://ark.intel.com/products/92984/Intel-Xeon-Processor-E5-2640-v4-25M-Cache-2_40-GHz) - 128G RAM - 8x16GB DDR4 2400Mhz 19200 ECC/REG - [Four HGST 6TB Enterprise SATA3 6Gb/s 7200RPM 128MB](https://www.hgst.com/products/hard-drives/ultrastar-7k6000) ### vm3.sea drives, we guess numbered left to right From `for i in a b c d; do smartctl -a /dev/sd$i | egrep 'Model|Serial|Capacity'; done` | Bay | Model | Serial | Capacity | Installed | | ---- | -------------------- | -------------- | -------- | ---------- | | 0 | HGST HUS726060ALE610 | K1J48AGD | 6TB | 2017.08.17 | | 1 | HGST HUS726060ALE610 | K1J2PTND | 6TB | 2017.08.17 | | 2 | HGST HUS726060ALA640 | AR11001EV17LLB | 6TB | 2020.05.01 | | 3 | HGST HUS726060ALE610 | K1J46RHD | 6TB | 2017.08.17 | ## psg.com [SUPERMICRO AS-1012G-MTF 1U Rackmount](http://www.supermicro.com/Aplus/system/1U/1012/AS-1012G-MTF.cfm) [H8SGL-F mobo](http://www.supermicro.com/Aplus/motherboard/Opteron6000/SR56x0/H8SGL-F.cfm) From `for i in 0 1 2 3 4; do smartctl -a /dev/ada$i | egrep 'Model|Serial|Capacity'; done` | LUN | Model | Serial | Size | | ---- | ---------------------- | --------------- | ---- | | 0 | WDC WD2000F9YZ-09N20L0 | WD-WCC1P0469969 | 2TB | | 1 | WDC WD2005FBYZ-01YCBB1 | WD-WMC6N0F1F8SD | 2TB | WDC WD2000F9YZ-09N20L0 WD-WCC1P0648270 removed from ata1 2017.04.09 WD-WCC1P0654846 replaced on 2017.03.04 ## raid0.sea.rg.net - [5018R-WR Chassis + MoBo](https://www.supermicro.com/products/system/1u/5018/sys-5018r-wr.cfm) - [X10SRW-F Motherboard](https://www.supermicro.com/products/motherboard/Xeon/C600/X10SRW-F.cfm) - [Intel Xeon® Processor E5-2609 v4](https://ark.intel.com/products/92990/Intel-Xeon-Processor-E5-2609-v4-20M-Cache-1-70-GHz-) - Samsung DDR4 2133MHzCL15 16GB RegECC 2Rx4 (PC4 2133) Internal Memory M393A2G40DB0-CPB - FreeBSD USB key left in USB port From `for i in {0..3}; do smartctl -a /dev/ada$i | egrep 'Model|Serial|Capacity'; done` ### raid0.sea.rg.net Drive Bays | LUN | Model | Serial | Capacity | Date | | ---- | -------------------- | --------------- | -------- | ---------- | | 0 | WDC WD60EFRX-68L0BN1 | WD-WX41DA5F88N9 | 6tb | 2018.12.09 | | 1 | WDC WD60EFRX-68L0BN1 | WD-WX11D363T2Y5 | 6tb | 2018.12.09 | | 2 | WDC WD60EFRX-68L0BN1 | WD-WX11D3678XTL | 6tb | 2018.12.09 | | 3 | WDC WD60EFRX-68L0BN1 | WD-WX41D75LN9KC | 6tb | 2018.12.09 | ## rip.psg.com [PDSMU with a Xeon and 4GB RAM](http://www.supermicro.com/products/motherboard/Xeon3000/3010/PDSMU.cfm) | LUN | Serial | Model | Size | | ---- | --------------- | ------------------------------- | ---- | | 0 | 9QE7MXMC | ST3250820NS | 250G | | 1 | WD-WMC5C0D5MXU1 | WDC WD2000F9YZ-09N20L1 01.01A02 | 2TB | | 2 | 9QE7MY84 | ST3250820NS | 250G | | 3 | WD-WMC5C0E2C2L0 | WDC WD2000F9YZ-09N20L1 01.01A02 | 2TB | ## Switches | name | mfr | model | ip sddress | | -------------- | ----- | -------------------- | ------------ | | sw0.sea.rg.net | Cisco | WS-C3750G-48PS | 147.28.0.253 | | sw3.sea.rg.net | Cisco | Nexus3064 48x10GE +4 | 147.28.0.239 | | sw4.sea.rg.net | Cisco | Nexus3064 48x10GE +4 | 147.28.0.238 | ### Remoived | sw1.sea.rg.net | SMC | SMC8024L2 | 147.28.0.252 | | -------------- | ----- | -------------- | ------------ | | sw2.sea.rg.net | Cisco | WS-C3750G-24PS | 147.28.0.246 | ## Miscelaneous Data ### Spare Drives | | | | | | ---------------- | ------------ | -------- | ---- | | spares in westin | | | | | | | | | | HGST | H3D30003254S | YNG1E3ZC | 3TB | | Seagate | ST31000528AS | 6VPCVN1Y | 1TB | | Seagate | ST3750640A8 | 3QD06D5B | 750G | | HGST | 118032816 | YFJLBZ5A | 2TB | | | | | | ### r1.sea gigether pic left to right | | | | ------ | --------- | | LAN | copper | | unused | copper | | six | copper | | unused | fiber sfp | | | | ``` Westin NTT/Verio 100baseFX PSG-STTLWA01-FE-VDR001 (199.238.113.9) r05.sttlwa01.us.bb.gin.ntt.net. 1000 LX Westin NTT/Verio OC3 PSG-STTLWA01-OC3-VDR001 (129.250.11.41) r02.sttlwa01.us.bb.gin.ntt.net SM IR ``` FastEthernet5/6 is up, line protocol is up (connected) > Hardware is C6k 100Mb 802.3, address is 00d0.0135.840a (bia 00d0.0135.840a) Description: AX: PSG - local wire Westin OC3c sprint facility # 10038527 SprintLink noc 800-232-6895 > noc@… FiberCloud tie-down to Sprint in MMR - Rack 303 Panel 1 Port L2 Single Mode [![200511.westin.jpg](https://wiki.rg.net/chrome/site/configs/200511.westin.jpg)](https://wiki.rg.net/chrome/site/configs/200511.westin.jpg) ## New Switching [![180802.arrcus-sea.jpg](https://wiki.rg.net/chrome/site/configs/180802.arrcus-sea.jpg)](https://wiki.rg.net/chrome/site/configs/180802.arrcus-sea.jpg) 2020.05.11