# Hacking the AlcaLu Image sros0.bknix.co.th

This is a log of what I have done to the VM installed in the style of [Installing a qemu/libvirt Guest on an Otherwise Ganeti System](https://wiki.rg.net/wiki/LibvertOnGaneti).

With much help from Alastair Johnson of AlcaLu.

## Password Configuration

I did not create user names yet, but it seemed changing the password was critical 

```
A:vRR# password 
Enter current password: 
Enter new password: 
Re-enter new password: 
```

## System Name, Password, etc.

```
A:vRR# configure system name sros0 
*A:sros0# configure system contact "Randy Bush <randy@psg.com>"
*A:sros0# admin save 
Writing configuration to cf3:\config.cfg
Saving configuration ... OK
Completed.
```

## Set Up IPv4 Basic Addressing

I configured the IP Address

```
A:sros0# bof          
A:sros0>bof# address 203.159.71.201/24 
*A:sros0>bof# save
```

I configured default routes.  Note that this must be done in two halves as this is the management interface and AlcaLu? did not want to facilitate real forwarding on this interface.

```
A:sros0>bof# static-route 0.0.0.0/1 next-hop 203.159.71.1    
*A:sros0>bof# static-route 128.0.0.0/1 next-hop 203.159.71.1
*A:vRR>bof# save
```

And a DNS Primary

```
A:sros0# bof primary-dns 203.159.71.10 
*A:sros0# bof save 
Writing BOF to cf3:/bof.cfg ... OK
Completed.
```

## SSH Needs a Bit of Tweaking

```
A:sros0# show system security ssh 

===============================================================================
SSH Server
===============================================================================
Administrative State      : Enabled
Operational State         : Up
Preserve Key              : Disabled
 
SSH Protocol Version 1    : Disabled
 
SSH Protocol Version 2    : Enabled
DSA Host Key Fingerprint  : 42:cc:bf:29:5f:11:5e:ab:20:3b:82:f5:2e:8d:72:77
RSA Host Key Fingerprint  : e9:6f:fd:93:d3:88:80:d0:e6:1f:62:88:8a:36:e5:52

-------------------------------------------------------------------------------
Connection                                Username             
    Version Cipher                        ServerName  Status
-------------------------------------------------------------------------------
No entries found
===============================================================================
A:sros0# configure system security ssh preserve-key 
*A:sros0# configure system security ssh no server-shutdown 
*A:sros0# configure system login-control idle-timeout disable 
*A:sros0# admin save 
```

## License File

I whacked in the license file by

```
file vi cf3:/timos.pie.b80.txt
```

and pasting in the file content.

Then tell the system where the file is

```
A:sros0# bof license-file cf3:/timos.pie.b80.txt 
*A:sros0# bof save 
Writing BOF to cf3:/bof.cfg ... OK
Completed.
```

This will take effect at the next reboot.