Layer-3 Discovery and Liveness Signing

The Layer-3 Discovery and Liveness protocol OPEN PDU contains an algorithm identifier, a key, and a L3DL certificate, which can be used to verify signatures on subsequent PDUs. This document describes two methods of key generation and signing for use by L3DL, Trust On First Use (TOFU) and a PKI-based mechanism to provide authentication as well as session integrity. The Key in the OPEN PDU SHOULD be the public key of an asymmetric key pair. The sender signs with the private key, of course. The device sending the OPEN PDU may use one key for all links, a different key for each link, or some mix(es) thereof. In the TOFU method the key sent in the OPEN PDU is generated on the sending device, is believed without question by the receiver, and used to verify all subsequent PDUs from the same sender with the same public key and algorithm. With the PKI method, an enrollment step is performed. The public key is signed by the the operational environment's trust anchor. In this way, the relying party can be confident that the public key is under control of the identified L3DL protocol entity. As part of enrollment or before hand, all relying parties must have received the trust anchor in an authentic manner. To the receiver verifying signatures on PDUs, the two methods are indistinguishable; the key provided in the OPEN PDU is used to verify the signatures of subsequent PDUs. The difference that PKI-based keys may be verified against the trust anchor when the OPEN PDU is received. In the PKI method the public key in the OPEN PDU MUST be verified against the trust anchor for the operational domain. The OPEN PDU public key is then used to verify all subsequent PDUs in the session. A mechanism for 'rolling' from the current public key to a fresh one is described in .

To avoid the creation of yet another IANA registry for digital signature algorithm identifiers, this specification makes use of the existing IANA registry for "DNS Security Algorithm Numbers" . In this registry, each signature algorithm is identified by an 8-bit value. The entries in this registry with "Y" in the "Zone Signing" column are appropriate for use with this protocol. For interoperability, all implementations of this protocol MUST support the RSASHA256 algorithm (identified by the value 8). Implementation MAY support any other registered "Zone Signing" signature algorithms.

There are three parts to using a key: signing PDUs, verifying the OPEN PDU, and verifying subsequent PDUs.

All signed PDUs are generated in the same way: Compose the PDU, with all fields including "Sig Algo" and "Signature Length" set, but omitting the trailing "Signature" field itself. The Certificate Length should be zero and the Certificate field should be empty. This is the "message to be signed" for purposes of the signature algorithm. Generate the signature as specified for the chosen algorithm, using the private key of the asymmetric key pair. In general, this will involve first hashing the "message to be signed" then signing the hash, but the precise details may vary with the specific signature algorithm. The result will be a sequence of octets, the length of which MUST be equal to the value in the "Signature Length" field. Construct the complete message by appending the signature octets to the otherwise complete message composed above. In the case of the OPEN PDU, the message to be signed will include the public member of the asymmetric keypair, but as far as the signature algorithm is concerned that's just payload, no different from any other PDU content.

The process for verifying an OPEN PDU is slightly different from the process for verifying other PDU types, because the OPEN PDU also establishes the session key. Verify that the PDU is syntactically correct, and extract the Auth Type, Key, Sig Type, and Signature fields. Verify that Auth Type and Sig Type refer to the same algorithm suite, and that said algorithm suite is one that the implementation understands. Construct the "message to be verified" by truncating the PDU to remove the Signature field (in practice this should not require copying any data, just subtract the signature length from the PDU length). Verify the message constructed above against the public key using the rules for the specific signature suite. Record Auth Type and Key as this sessions's authentication type and session key, for use in verifying subseuqent PDUs. If any of the above verification steps fail, generate an error using error code 2 ("Authorization failure in OPEN").

The process for verifying non-OPEN PDUs is slightly simpler, but follows the same basic pattern as for OPEN PDUs. Verify that the PDU is syntactically correct, and extract the Sig Type and Signature fields. Verify that Sig Type refers to the same algorithm suite as the Auth Type recorded during verification of the OPEN PDU. Construct the "message to be verified" by truncating the PDU to remove the Signature field. Verify the message constructed above against the recorded session key using the rules for the specific signature suite. If any of the above verification steps fail, generate an error using error code 3 ("Signature failure in PDU").

Using a PKI is almost the same as using TOFU, but with one additional step: during verification of an OPEN PDU, after extracting the Key field from the PDU but before attempting to use it to verify the OPEN PDU signature, the receiver MUST verify the received key against the PKI to confirm that it's an authorized key. Generating an OPEN PDU using the PKI method requires a certificate, which must be supplied via out of band configuration. The certificate is a signature of the public key to be sent in the Key field of the OPEN PDU, signed by the trust anchor private key. Verifying an OPEN PDU using the PKI method requires the public key of the trust anchor, which the receiver uses to verify the certificate, thereby demonstrating that the supplied public key represents an authorized L3DL speaker in this administrative domain. We use the term "certificate" here in the generic sense, not as defined in . X.509 certificates are not used here; X.509 certificates are more complicated than needed for L3DL. The L3DL certificates are just signatures of one key (the public key supplied in the Key field of the OPEN PDU) that can be verified by another trusted public key (the trust anchor).

Generating and signing the OPEN PDU with the PKI method is almost the same as in . The only difference is that the PKI method MUST supply the appropriate certificate in the Certificate field. Note that the Auth Type field applies to both the Key and Certificate fields. That is: the certificate uses the same certificate suite as the session keys, L3DL does not support cross-algorithm-suite certification.

Verifying the OPEN PDU with PKI is similar to verifying with TOFU as described in , but includes one critical extra step: After extracting the Key field from the PDU but before verifying the Signature, extract the Certificate field and verfiy that the Certificate is a valid signature of the Key field, according to the rules for the signature suite specified by Auth Type. If this step fails, handle as in .

Whether to use TOFU, PKI, or no signatures at all is a matter of local policy, to be decided by the operator. The useful policy combinations for Key and Certificate are probably: Not signing: sender need not sign, receiver does not check. Require TOFU: sender MUST supply key and receiver MUST check, but L3DL certificates not needed and ignored if sent. Allow TOFU: sender MUST supply key and receiver MUST check, receiver SHOULD check certificate if supplyed by sender. Require PKI: sender MUST supply key and L3DL certificate, receiver MUST check signature and verify the L3DL certificate.

Modern key management allows for agility in 'rolling' to a new key or even algorithm in case of key expiry, key compromise, or merely prudence. Declaring a new key with an L3DL OPEN PDU would cause serious churn in topology as a new OPEN PDU may cause a withdraw of previously announced encapsulations. Therefore, a gentler rekeying is needed. Prior to 'rolling' to a new key or new algorithm, a new public/private key pair is generated. If PKI is being used, then the trust anchor also signs the new public key to create a new L3DL certificate.

0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type = 8 | Payload Length | New Key Type | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | New Key Length | New Key ... | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | New Cert Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | New Certificate ... | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Old Key Type | Old Signature Length | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Old Signature ... | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The New Key Type, New Key Length, New Key, New Cert Length, and New Certificate fields declare the replacement algorithm, key, and L3DL certificate. The NEWKEY PDU is signed using the current (soon to be old) algorithm and key. The sender and the receiver should be cautious of signature algorithm downgrade attacks. To avoid possible race conditions, the receiver SHOULD accept signatures using either the new or old key for a configurable time (default 30 seconds). This is intended to accommodate situations such as senders with high peer out-degree and a single per-device asymmetric key. If the sender does not receive an ACK in the normal window, including retransmission, then the sender MAY choose to allow a session reset by either issuing a new OPEN PDU or by letting the receiver eventually have a signature failure (error code 3) on a PDU. The rekeying operation changes the session key and the associated algorithm described in . The NEWKEY PDU itself is verified using the old algorithm and session key. After the NEWKEY PDU has been accepted, subsequent PDUs are verified with the new algorithm and the new session key.

The TOFU method requires a leap of faith to accept the key in the OPEN PDU, as it can not be verified against any authority. Hence it is jokingly referred to as Married On First Date. The assurance it does provide is that subsequent signed PDUs are from the same peer. And data integrity is a positive side effect of the signature covering the payload. The PKI method offers assurance that the L3DL certificate, and hence the public key, provided in the OPEN PDU are authorized by a central authority, e.g. the network's security team. The onward assurance of talking to the same peer and data integrity are the same as in the TOFU method. With the PKI method, automated device provisioning could restrict which L3DL certificates are allowed from which peers on a per interface basis. This would complicate key rolls. Where one draws the line between rigidity, flexibility, and security varies. The REKEY PDU is open to abuse to create a signature algorithm downgrade attack.

This document requests the IANA create a new entry in the L3DL PDU Type registry as follows:

PDU Code PDU Name ---- ------------------- 8 NEWKEY This document requests the IANA add registry entries for "TOFU - Trust On First Use" and "PKI" to the L3DL-Signature-Type registry as follows:

Number Name ------ ------------------- 1 TOFU - Trust On First Use 2 PKI